VENT COVER SET 3x for fireplace with straight glass pane

VENT COVER LUFT

A fireplace vent cover is an element used for ventilation. It is an aesthetical termination of the ducts that distribute the hot air from the fireplace. They should always be installed in the fireplace as they protect the fireplace stove against overheating and ensure proper circulation in the housing. Exhaust grilles also allow the introduction of warm air into the room.

The grille is distinguished by its modern and minimalist look and its elongated form makes it perfect for contemporary style interiors.

Note: The fireplace grate is a necessary element for the installation of fireplace inserts, including those that have an air intake from the outside. The air inlet is responsible for controlling the combustion process and the ventilation grille is responsible for air circulation in the building.

 

KIT

A set of 3 grilles has been prepared especially for people who are looking for a set for our fireplace inserts with straight glass.

This set consists of the grilles:

- LUFT/9/60/45S/C - 2 pieces outlet grille. The active area of 1 grille: 290 cm2; width 60 cm, height 9 cm; depth 12.67 cm

- LUFT/9/60/45S/C/SF - 1 pcs for inlet grille. Active area of 1 pcs: 257 cm2; width 60 cm, height 9 cm; depth 7,85 cm

When installing the ventilation grille, remember to position it correctly. If it is installed over a fireplace, the air intake should be on the bottom; if it is installed under a fireplace stove, the air intake should be on top. This will allow the proper convection flow of heated air to be maintained.

 

ADVANTAGES

- Minimalist, simple finish will suit any interior.

- Concealed air inlet - made at an angle of 45 degrees.

- Front without visible joints.

Powder coated - its color remains durable and resistant to high temperatures, and the grille itself is more resistant to mechanical damage.