Recuperator Air 600 Horizontal

The Air 600 Horizontal recuperator is mechanical ventilation with heat recovery. The system ensures optimum air quality in the building and prevents heat loss. The recuperation operates completely maintenance-free and makes no noise. The central unit is located in the attic and manages air circulation through a network of ducts concealed in the walls and ceilings.

BENEFITS

• Ensures the proper functioning of ventilation in the building.  
• Recuperation is mechanical ventilation with heat recovery.
• The system ensures optimal air quality in the building and prevents heat loss.  
• During operation, it eliminates fungi, microorganisms from the air and prevents their multiplication. You breathe good quality air. 
• Drip tray.

UNIT CHARACTERISTICS

• The unit has an extremely high efficiency of 90 - 98%. 
• Meets the requirements for the "Clean Air" subsidy. 
• M5 filter, in the exhaust chamber to protect the exchanger.
• Fans: RH19V-4IP.Z8.AR 190 VPRO radial with ECO55 motor. 170W. 1,75-1,45A. Installed in the inlet and outlet chambers of the AIR 400 Horizontal recuperator D3G146-HQ13-62 EBM-PAPST radial EC. 230W. 1,8A. Installed in the intake and exhaust chambers of the AIR 600 Horizontal recuperator.
• Heat exchanger with cross-flow, counter-current design. Recair RS160ND - H500 MN. Recair AIR 400 Horizontal Recuperator RC160ND - H500 MN. Recuperator AIR 600 Horizontal
• Control: AREO_3.43 - COMPIT. Internet module: INEXT - COMPIT.
• Bypass 100%, controlled by BELIMO CM230 electric actuator.
• Pre-heater, PTC 3,0 KW. Automatically activated. Prevents the exchanger from freezing. In AIR 400 Horizontal (basic), AIR 600 Horizontal (basic) recuperators, the pre-heater is not available.
• M5 filter, in the intake chamber. An optional additional filter can be used to improve the quality of the supply air.
• Connection to the system: Ø160. recuperator AIR 400 Horizontal Ø200. recuperator AIR 600 Horizontal.
• Bottom flap locks x6pcs. Two of them, with the possibility of attaching safeguards against unwanted opening.
• Mounting brackets x 4pc.

HIGH QUALITY MATERIALS

The main body of the recuperator is made of EPP material, which can be compared to the most durable products on the market, i.e. fibreglass or carbon fibre.  It is alsȯ widely appreciated for its high thermal resistance. The material remains stable over a wide temperature range from -40 to +60 °.

Fire retardant additives used with extenders ensurę low flammability and excellent resistancé to UV radiation.  

It is an excellent sound insulator, protects against noise and reduces vibrations.

By making special connection rims in the individual components, the closed casing is 100 per cent airtight, which translates into very good heat recovery efficiency results.  

By making the casing from polypropylene, the weight of the central unit is reduced by twice that of their sheet metal counterparts, making the unit much easier to install and transport.  

As a visual finish to the casing, a galvanised, powder-coated white sheet metal is used. Weight: 46 kg

REMOTE CONTROL - AS AN OPTION

The recuperator is optionally equipped with an internet module for remote control. It works with a mobile application.

TECHNICAL DATA

Supply voltage V/Hz: 1x 230 V

Maximum fan power: 2pcs x 230 W

Maximum fan current consumption [A]: 2 x 1.8 A

Maximum m3/h output: 630

Fan speed rpm: 2400

Noise level [(dB) A/3m]: 45

Maximum discharge air temperature ֯ C: 50

Maximum exchanger efficiency [ %]: up to 98%.

Exchanger material: polystyrene

Housing material: EPP/powder-coated steel

Insulation: EPP

Filter intake: F5

Exhaust filter: M5

Air connection spigot diameter: 200

Displacement pressure: 200 Pa

Preheater power [kW]: 2,5

Total unit power [kW]: 3,01

Total current consumption [A]: 14,5

Heat exchanger: Cross-flow counter-flow (enthalpy option)

Fans: EC fans