Steel fireplace KRATKI LAWA 9 kW Ø 200

Discover the LAWA steel fireplace – a thoughtful combination of modern styling and uncompromising thermal efficiency. This robust, grateless device is designed to be the heart of your home heating system. The fireplace's rotating cast-iron exhaust outlet provides complete installation flexibility, allowing you to connect the fireplace at any angle.

The device's well-thought-out design translates into increased comfort of everyday use. The TERMOTEC-lined combustion chamber ensures stable temperature maintenance, while double glazing effectively retains energy inside the firebox, reducing heat loss through the front. The absence of a traditional grate ensures more complete wood burning directly at the bottom of the chamber, while the perforated handle with a modern design heats up more slowly thanks to constant airflow.

Maximum efficiency and robust construction

The fireplace's durability is based on a solid 4 mm thick steel body, designed for trouble-free operation and resistance to thermal loads. An optimized triple air supply system ensures a stable combustion process. It includes primary air supplied to the firebox floor for easier lighting, secondary air to burn the gases in the side sections and increase fuel efficiency, and an air curtain that protects the glass from soot and dirt buildup.

The entire process is controlled in an extremely intuitive manner using a single controller, which allows for quick and precise adjustment of the damper position and its opening degree to the required flow rate. For maximum safety, the design prevents complete shutoff of primary air, ensuring a constant, minimal flow of air to the combustion zone.

View of the fire and ease of use

The double-glazed door provides exceptional visual and thermal comfort. The use of secondary glazing reduces heat radiation through the front and lowers the temperature of the outer glass, while retaining more energy inside the combustion chamber for a more efficient process.

The device's appearance is complemented by a perforated handle with a technical, modern design. Perforation holes improve air circulation around the handle and reduce its heat buildup, increasing the comfort of daily use (for safety reasons, however, the use of a protective glove is recommended).

Why choose a LAWA fireplace?

■ Rotatable exhaust outlet (Ø200 mm): High thermal resistance, the movable design of the exhaust outlet made of cast iron facilitates precise adjustment of the connection direction to the existing chimney system and trouble-free connection to the chimney system at any angle.
■ Fireplace body:Made of 4 mm thick steel.
■ TERMOTEC lining:Available in light or dark versions, it is characterized by accumulation properties – it releases energy into the environment. Soot particles are burned after reaching an operating temperature of 300°C. Thanks to this, even the light-colored TERMOTEC remains clean when it reaches its operating temperature.
■ Grateless combustion: the wood burns on the ash – less fuel loss, minimal fuel waste, and maximization of energy utilization.
■ Full control over the combustion process: control is carried out using a single, intuitive regulator that precisely manages all air channels and maintains their correct proportions, without the possibility of completely cutting off the supply.
■ Perforated handle: an ergonomic handle with a modern texture, ensuring comfortable opening and slower heating.
■ Heat-resistant glass: with temperature resistance up to 660°C.
■ Clean glass system: an air curtain that limits soot build-up.
/>■ Double door glass: guarantees better insulation and a higher temperature in the chamber, while double glazing effectively reduces the heating of the outer glass compared to single-glazed solutions.
■ Triple air supply system: primary air, secondary air and an air curtain to optimize the combustion process.
■ Deflector system: effectively extends the exhaust gas path, increasing combustion efficiency and allowing for better use of thermal energy.
■ Outdoor air intake: Ø125 mm connector allowing for the introduction of fresh air from outside the building.
■ Precise installation: compact Ø50 mm leveling feet with a rubber insert facilitate stable positioning and attachment of the device even to uneven surfaces.
■ Factory slots for automation: Dedicated mounting points for the exhaust gas sensor (on both sides) and the door opening sensor (reed switch).
■ Ideal for heat recovery: airtight combustion chamber designed for modern, energy-efficient construction.
■ Meets the following standards: Ecodesign, BImSchV 2, Flamme Verte, Wallonair (BE), 5 Stelle Certificato ambiental (IT), DIN+ and 15a B-VG.