Cast iron fireplace ANTEK 10 kW Ø 180 installation kit

Product information:

insert made of cast iron

producer Kratka

minimum thickness of cast iron 8 mm

heating power range from 6 to 13kW

ENERGY CLASS A

has a grate and an ash pan, which makes it easier to keep the insert clean

clean glass system (air guide) reduces soot deposition

built-in deflector that extends the exhaust gas path

cold handle system, allows you to remove the handle when lighting the fireplace

built-in damper regulates the chimney draft force

air intake optional - can be purchased as a set

the front is equipped with heat-resistant ceramics that can withstand temperatures up to 660°C.

kit for installing a fireplace at home

We have various models of these inserts at our auctions.

SET CONTAINS:

Antek cast iron fireplace insert 10 kW - 1 pc.

Inlet - 1 pc.

Transition from 90° inlet - 1 pc.

Flex fi 125 degrees - 1 pc.

Base for insert - 1 pc.

Steel pipes for connecting the chimney: 1 meter fi 180 - 1 pc.

Steel pipes for connecting the chimney: 0.5 meters diameter 180 - 1 pc.

Movable steel elbow, angle 90 degrees, diameter 180 - 1 pc.

Transition from the pipe to the ceramic chimney fi 180 to the hole fi 200 - 1 pc.

Throttle with rod - 1 pc.

Insulation boards for installation - 20 pcs.

Pins for mounting boards - 16 pcs.

Max glue for insulating boards - 1 pc.

Joint glue - 3 pcs

Snail clamp - 4 pcs

LUFT SF black grille 9x60 - 1 pc.

LUFT black grille 9x60 2 pcs

Inlet-pipe transition fi 125 - 1 pc.

The installation kit was used by our installers to install the fireplace insert below.

Your fireplace may look like this.

If you want to change or add an element to the set, you will find a wide selection of fireplace accessories on our other auctions.

Cartridge technical data:

Nominal power (kW): 10

Heating power range (kW): 6-13

Plug diameter (mm): 180

Thermal efficiency (%): 70

CO emissions (at 13% O₂) ≤: 0.14%

Pollen emission (dust)*: 22

Exhaust gas temperature °C: 310

Weight (kg): 91

Width (cm): 60

Height (cm): 62.2

Depth (cm): 33.4

Max log length (mm): 330

Material: cast iron

Fuel type: seasoned hardwood recommended

* mg/Nm3

DIY CONSTRUCTION BOARDS

The set includes boards resistant to high temperatures, which you can use to easily build the fireplace.

The casing is made of these boards conveniently and quickly.

Built-in damper

Allows you to adjust the chimney draft, which makes the combustion process more effective. Adjustment is possible using the knob.

COLD HANDLE SYSTEM

The handle on this fireplace insert can be removed while burning, which will ensure that it does not heat up.

ASH DRAWER

Makes it easier to keep the insert clean. The knob at the front of the drawer allows you to regulate the air flow from the room. Additionally, the fence placed in the insert prevents the wood from falling out.

BUILT-IN DEFLECTOR

Afterburning of fuel particles thanks to a deflector that extends the exhaust gas path. This process also increases combustion efficiency and ensures better energy use, thus minimizing the emission of harmful substances into the atmosphere.

THICKLY AROUND RADIATORS

Maximum use of heat is achieved thanks to densely arranged radiators on the walls of the fireplace insert.

VALUABLE INFORMATION

STRONG MATERIAL

Our fireplace uses maximum heat. You can be sure that the thickness of the cast iron is optimal, certified to the highest European standard. Our cast iron is up to 8 mm thick.

HIGH TEMPERATURE RESISTANT GLASS

The classic front of the insert is equipped with heat-resistant ceramics that can withstand temperatures up to 660°C.

MAXIMUM ENERGY USE

Afterburning of fuel particles thanks to a deflector that extends the exhaust gas path. Increased efficiency of the insert thanks to manual regulation of the chimney draft using the built-in damper. Manual control of the combustion process is carried out via the ash pan slider.

SAFETY AT THE HIGHEST LEVEL

The decorative fence makes it easier to keep the furniture clean and protects it from falling out.

COMFORTABLE USE

Cold handle system that reduces the risk of burns by allowing you to remove it while smoking.

Ash drawer/container for collecting burnt wood residues and a movable grate that facilitates ash removal.

Reduction of soot deposition thanks to clean glass system (air deflector).

RECOMMENDED FUEL

Logs of deciduous trees such as: beech, hornbeam, oak, alder, birch, ash, etc. with the dimensions of logs or logs: length approx. 30 cm and circumference from approx. 30 cm to 50 cm - moisture content of the wood used to heat the device should not exceed 20%.

VENTILATION GRATES

Be sure to buy this so that your fireplace works properly and has adequate ventilation. Our fireplace has a specific

LIGHTING

Light the kindling and close the fireplace door. Depending on the length of the chimney and its draft, lighting may take from a few to several minutes. In case of insufficient draft in the chimney, in the initial stage of lighting the fireplace, open the fireplace door by opening it. It is also a good idea to open the window in the room where the fireplace is installed to let more air in (only in the case of devices that do not have a built-in air intake from the outside)

REMEMBER!

Our fireplace insert comes with an instruction manual in which you will find all information regarding operation and installation.