Water turbodym with a coil

Turbodym is a fireplace cowl designed to be mounted on the exhaust outlet from the fireplace. The task of the element is to recover some of the thermal energy from the exhaust gases leaving the combustion chamber of the fireplace insert. Heat is transferred further to domestic hot water or, through a central heating system, to radiators in residential areas. It is a very economical source of heat, because it does not require the use of additional fuel, it only uses the excess heat in the exhaust gases flowing to the chimney. Hot exhaust gases flow through the turbodym, heating the water in the exchanger`s jacket. Hot water is led out via a spigot located at the side wall of the exchanger. Turbodym is adapted to cooperate with radiator installations and floor heating systems supplied with central heating furnaces using solid fuels, gas, oil, electricity, heat pumps and solar batteries.

Turbodym is made of steel intended to work at elevated temperatures. This material is adapted to operate in central heating systems, it ensures high reliability of the device, thermal resistance and long-lasting operation.

The central part of the device is the inside chamber in which there is a system of tubes increasing the contact surface of water with the heating medium, i.e. exhaust gases. In addition, turbodym is equipped with a coil, i.e. a copper tube which is a thermal protection device.

CHARACTERISTICS:

Power (kW): - up to 7 kW depends on the power of the fireplace insert

Dimensions: height x width (mm): 560x316

Flue diameter (mm): 200

Thermal efficiency (%): up to 60% (depending on the efficiency of the hearth)

Weight (kg): 25,6

Water capacity (l): 17,5

Note: After installing the device on the flue of the insert, free access to it should be provided.