- PRO
Water heating fireplace MBA Left 17 kW Ø 200 black thermotec lining
- KRATKI PRO
- Ecodesign
- Designed for recuperation
- BImSchV 2
Description
The double glass inserts of the MBA PW line are an economical and ecological solution with a water-based unit, which does not differ from a the typical air insert. Thanks to the unusual vision of the fire and the delicate frame, it perfectly fits into the design of modern interiors. This type of fireplace is often chosen for houses with open spaces , such as living rooms with dining areas.
MODERN DESIGN
The insert is equipped with a single, decorative glass, which makes it look elegant and modern. This solution visually enlarges the front of the insert and highlights the vision of the fire.
The door has a comfortable handle.
MAXIMUM ENERGY USE
More efficient burning process and maintaining temperature to keep the warmth for longer, thanks to the lining of combustion chamber with TERMOTEC - a heat absorbing material that increases the temperature in the combustion chamber.
Afterburning of fuel particles thanks to two deflectors which extend the exhaust path. This process increases the efficiency of burning and guarantees better use of energy. It also minimizes the emission of harmful substances to the atmosphere.
Air supply to the insert comes only from outside, thanks to the built-in air intake connector fi 125 mm. It is controlled by an adjustable throttle with one adjuster below the door. This solution excludes errors of improper use. The whole failure-free mechanism works very quietly.
There is a triple air system of combustion chamber in the insert. Primary air, which facilitates the firing of wood, is provided over the entire width of the burning plate insert, on which the whole process of burning takes place. Non-grate insert offers so-called phenomenon of afterburning of the ashes. Secondary air - providing economical and ecological combustion - is supplied by a system of holes located in the back wall.
In addition, there is a system of clean glass system (air curtain), that means, the air is delivered directly to the glass through channel system located on the sides of the fireplace. In this way air is supplied to the upper part of the combustion chamber, which burns the gases produced by the wood combustion process, which further limits the emission of CO to the atmosphere.
Use of such venting system allows to precisely control the combustion process.
Special unit containing water jacket and horizontally stacked flame tube, through which water flows, allows to gather heat from the flue gases and transfer them to heating system for high energy efficiency. In addition, the device has a built-in coil pipe to protect it from overheating. Water jacket body is reinforced with pins.
Input / output connector to the system - 1 inch, and to the coil pippe ½ inch.
Sturdy and durable to tension fire doors are made of closed profile. The door gasket is in a profiled channel, which guarantees its proper adhesion and prevents it from falling out during operation.
COMFORTABLE USE
The device is equipped with a clean glass system – thanks to so-called air curtain, the airflow is distributed evenly, sweeping the glass and soot settling is reduced to minimum. This allows to maintain a attractive and clean look of glass for a long time.
Insert without grate, witch so-called post-combustion of ash. In practice, this means that fuel burns out to ash, which remains in minimum quantity. Heat energy generated in this way is used in maximum.
The special perforated design of the handle protects against excessive heating, which has the influence on the high comfort of using the fireplace.
ECOLOGICAL BURNIGN
Thanks to its construction and the triple combustion chamber ventilation system, the cartridge meets the Ecodesign requirements.
Technical data
Rated output (kW) | 17 |
---|---|
Heating power range (kW) | 9.0 - 19.5 |
Heating efficiency (%) | 86 |
Max working pressure (bar) | 2 |
Water capacity (l) | 47 |
Exhaust gas temperature (℃) | 201 |
Max length of logs (cm) | 50 |
Min outlet grids active field (cm2) | 480 |
Min inlet grids active field (cm2) | 240 |
Door opening direction | Left |
Materials | Steel |
Self Closure | No |
Flue outlet diameter (mm) | 200 |
Energy class | A+ |
---|---|
Average power from water (kW) | 9 |
Moc cieplna do ogrzewania pomieszczeń (kW) | 8 |
Energy efficiency index (EEI) | 113.2 |
Dust emission (mg/Nm3) | 8 |
CO emissions (at 13% O 2 ) ≤ given in % | 0.09 |
Meets requirements | KRATKI PRO, Ecodesign, Designed for recuperation, BImSchV 2 |
---|
EAN | 5901350031308 |
---|---|
Design features | Air intake - built in , Combustion chamber lining, Decorative glass |
Type of fuel | Seasoned deciduous wood (humidity ≤20%) |
Width (cm) | 91 |
---|---|
Height (cm) | 146 |
Depth (cm) | 57.5 |
Weight (kg) | 293 |
Customer reviews
-
Daniel S.
Noch nicht eingebaut oder in Betrieb genommen aber macht qualitativ einen sehr guten Eindruck.
Warranty and returns
All products on www.kratki.com are brand new, free from physical and legal defects and have been legally launched on the Polish market. The manufacturer gives a 5-year warranty on the proper functioning of the fireplace stove from the moment of its purchase. Fireplace grates and seals are covered by a guarantee for a period of 1 year from the time of purchasing the fireplace stove. The guarantee does not cover: heat resistant ceramics. The use of the fireplace stove, method of installation to the chimney, and operating conditions must be in accordance with the instruction manual.
A Customer who is a Consumer who has signed a Sales Agreement can withdraw from it within 14 days without giving any reason. The deadline for withdrawal from the Sales Agreement starts at the moment the Goods are taken possession of by the Client or a third party indicated by the Client other than the carrier. The declaration can be made on a form, a sample of which has been placed by the Seller on the website of the Store at the address: withdrawal form.