W3 connection

Grille connection with three fans - Air supply device for any fireplace, supporting the blowing force of air coming from the fireplace to individual rooms.

This solution was developed based on the suggestions from our customers, who were not fully satisfied with the gravitational distribution. All you need to do is install our connection to a fireplace and connect to 12V/1.0A.

Using this fan can significantly intensify the hot air “generation” by our fireplace. It is enough to head-mount it at a correct location, under the insert on the enclosure, so that it blows cold air into the circulating space around the fireplace insert. This will help achieve much more hot air and accelerate its flow through the chamber and distributing pipes, hence, enable to heat the apartment to a greater extent, at the same level of fuel consumption. In addition, the fan is equipped with absorbers, which thoroughly suppress vibrations.

The fans may be dismantled without any problems in a few minutes, without having to make any modifications. The set includes: an assembly pocket with three fans for a 17x49cm grille. The element may be installed into a 17x49 cm grille socket.

NOTE! A power supply has to be purchased for the connection. Should you not purchase a power supply from our offer, please remember that it is 1.0A. Additionally, prior to operating, it should be thoroughly checked each time in terms of the set voltage range, especially, if it has set parameters, and polarity.

FEATURES - FOR 1 FAN:

Resistance: up to 80°C

Dimensions: 120x120x25mm

Air flow: ~65 CFM (~110,5 m3h)

Rated voltage: 12 VDC

Current: 0.2 A

Rotations: 1500 RPM +/- 10%

Bearing: FDB Bearing System

Noise: 21 dBa.

FEATURES - PARAMETERS FOR 3 FANS:

Power: 6,48W

Current: 0,54A.