Steel fireplace LUCY 12 kW Ø 200 installation kit

Product offered:

LUCY 12kW steel fireplace insert with TERMOTEC lining and decorative GLASS glass + INSTALLATION KIT

Catalog number:

##LUCY/12/ASSEMBLING/ASSEMBLING KIT##

Product information:

meets the requirements of
ECO DESIGN
meets the restrictive German standards
BImSchV 2, determining the maximum CO emissions
ENERGY CLASS A
movable exhaust gas outlet with 360° adjustment
, thanks to which, in the case of installation, there is no need to purchase additional elbows
moveable legs
, making it easier to level the insert
effective combustion and longer temperature maintenance thanks to TERMOTEC combustion chamber lining
has a grate and ash pan, which makes it easier to keep the insert clean
the insert has a built-in external air inlet connector fi 125 mm
intended for
recuperation
wide range of heating power from
5 to 15 kW
high efficiency of up to 80%
panoramic glazing with GLASS decorative glass
installation kit p>

SET CONTAINS:

LUCY 12 kW air fireplace insert - 1 pc.
Snail clamp - 4 pcs.
Max glue for insulating boards - 1 pc.
Join glue - 3 pcs.
Pins for mounting plates - 16 pcs.
Flex fi 125 degrees - 1 pc.
Base for the insert - 1 pc.
Steel pipes for connecting the chimney: 1 meter fi 200 - 1 pc.
Steel pipes for chimney connection: 0.5 meters, fi 200 - 1 pc.
Movable steel elbow, 90-degree angle, fi 200 - 1 pc.
Transition from the pipe to the ceramic chimney, fi 200 - 1 pc.
Insulation boards for buildings - 20 pcs.
LUFT black 9x80 grille - 2 pcs.
LUFT SF black 9x80 grille - 1 pc.
Rosette diameter 125 - 1 pc.

The installation kit was used by our installers to create the presented LUCY fireplace insert.

Your fireplace can look just like our installers made it

Technical data:

Nominal power (kW): 12

Heating power range (kW): 5-15

Plug diameter (mm): 200

Thermal efficiency (%): 80

CO emissions (at 13% O₂) ≤: 0.10%

Pollen emission (dust) (mg/Nm3): 15

Exhaust gas temperature °C: 270

Weight (kg): 166

Width (cm): 70.4

Height (cm): 120.3

Depth (cm): 42

Max log length (mm): 350

Material: steel

Type of fuel: recommended seasoned hardwood with humidity ≤20%

Movable exhaust gas outlet.
Triple aeration system for the exhaust gas chamber.
Elegance and comfortable handle.
Adjustable leg height.
Precise air damper control.
Built-in air intake .
Decorative Glass type glass with an air curtain (clean glass system)
Termotec lining.

DECORATIVE GOLD AND SILVER HANDLES

The fireplace has the option of replacing the handles of the handles. In our other auctions you can equip yourself with a gold or silver handle. Excellent quality of the material and a special perforated structure ensure comfortable use.

ROTARY EXHAUST OUTLET

Possibility to change the exhaust gas outlet setting, which makes it easier to connect the insert. 360° adjustment allows you to connect the exhaust gas outlet at the back or top of the insert.

DECORATIVE GLASS GLASS

The insert is equipped with a single, decorative GLASS glass, thanks to which it looks elegant and modern. The use of this solution optically enlarges the front of the insert and emphasizes the vision of the fire.

REMOVABLE GRID

Allows access to the ash container, which makes it easier to keep the insert clean.

PLACEMENT

THERMOTEC

Combustion chamber lined with heat-storing material

TERMOTEC  which increases the temperature in the fireplace. Thus, combustion is more ecological and the high temperature remains high for a longer time.

CLEAN GLASS SYSTEM

The air guide, which is mounted on the top of the insert front, limits the deposition of soot.

ADJUSTABLE FEET

They enable perfect leveling of the insert in relation to the ground during installation.

BUILT-IN AIR INTAKE ADJUSTMENT

The outside air supply is regulated using the built-in damper located below the door. The entire mechanism works inside the fireplace, very quietly and trouble-free.

INNOVATIVE HANDLE

The special perforated design of the handle protects against excessive heating, which increases the comfort of using the fireplace.

MAXIMUM ENERGY USE

The body and front of the insert are resistant to high temperatures thanks to the material used - high-quality steel.

Efficient combustion and longer temperature maintenance thanks to the combustion chamber lining

TERMOTEC - a heat-accumulating material that increases the temperature in the chamber.

A system of two deflectors that extend the exhaust gas path, improving combustion ecological.

Supplying air only from the outside thanks to the built-in air inlet nozzle diameter 125 mm. Air inlet regulation using one regulator, which excludes errors due to improper use.

Triple combustion chamber air supply system: primary air - supplied under the grate; secondary air is supplied through holes in the rear wall. Additionally, the insert uses a clean glass system (air curtain).

SAFETY AT THE HIGHEST LEVEL

Excellent tightness thanks to solid welds made in a noble gas shield.

Steel elements laser cut using modern devices and then bent on CNC bending machines.

The front of the insert is equipped with heat-resistant glass that can withstand temperatures up to 660°C.

ECOLOGICAL COMBUSTION

The device meets the requirements of Ecodesign and the BImSchV 2 standard, which determines the maximum CO emission.

COMFORTABLE USE

The removable grate and ash pan make it easier to keep the insert clean.

Limited soot deposition thanks to the clean glass system (air deflector).

Can be used in various installation conditions, thanks to adjustable legs and a movable exhaust gas outlet with 360° adjustment.

MODERN DESIGN

Decorative glass that can withstand temperatures up to 660°C, which gives the fireplace a modern and elegant look and optically enlarges the front of the insert.

Elegant and comfortable handle.