Steel fireplace KRATKI LUCY left 12 kW Ø 200 black thermotec lining

Product offered:

LUCY 12kW BS steel corner fireplace insert with left side glass and black lining

Catalogue number: ##LUCY/12/L/BS/BLACK##

Product information:

• meets ECODESIGN requirements
• meets the restrictive German BImSchV 2 standards, which determine the maximum CO emissions
• Movable exhaust gas outlet with 360° adjustment, so during installation there is no need to purchase additional elbows
• ENERGY CLASS A
• movable legs that facilitate leveling of the insert
• effective combustion and longer temperature maintenance thanks to the Termotec combustion chamber lining
• has a grate and an ash pan, which makes it easier to keep the insert clean
• the insert has a built-in air intake duct from the outside, diameter 125 mm
• intended for recuperation
• wide range of heating power from 5 to 15 kW
• black Termotec lining
• high efficiency up to 80%
• panoramic glazing with GLASS decorative glass

Technical data:

• Nominal power (kW): 12
• Heating power range (kW): 5-15
• Plug diameter (mm): 200
• Thermal efficiency (%): 80
• CO emissions (at 13% O2) less than: 0.10%
• Pollen emission (dust) (mg/Nm3): 15
• Exhaust gas temperature C: 270
• Weight (kg): 194
• Width (cm): 69.8
• Height (cm): 127
• Depth (cm): 48
• Max log length (mm): 350
• Material: steel
• Type of fuel: recommended seasoned hardwood with humidity less than 20%
• Movable exhaust gas outlet.
• Triple aeration system for the exhaust gas chamber.
• Elegance and comfortable handle.
• Adjusting the height of the legs.
• Precise air damper control.
• Built-in air intake.
• Decorative Glass type glass with an air curtain (clean glass system)
• Termotec lining.

DECORATIVE GOLD AND SILVER HANDLES

The fireplace has the option of replacing the handles of the handles. In our other auctions you can equip yourself with a gold or silver handle. Excellent quality of the material and a special perforated structure ensure comfortable use.

ROTARY EXHAUST OUTLET

Possibility to change the exhaust gas outlet setting, which makes it easier to connect the insert. Adjusting the setting 360° allows you to connect the exhaust gas outlet at the back and at the top of the insert.

DECORATIVE GLASS GLASS

The insert is equipped with a single, decorative GLASS glass, thanks to which it looks elegant and modern. The use of this solution optically enlarges the front of the insert and emphasizes the vision of the fire.

REMOVABLE GRID

Allows access to the ash container, which makes it easier to keep the insert clean.

ACUMOTTE LINING

The combustion chamber is lined with ACUMOTTE heat-storing material, which increases the temperature in the fireplace. Thus, combustion is more ecological and the high temperature remains high for a longer time.

CLEAN GLASS SYSTEM

The air guide, which is mounted on the top of the insert front, limits the deposition of soot.

ADJUSTABLE FEET

They enable perfect leveling of the insert in relation to the ground during installation

INNOVATIVE HANDLE

The special perforated design of the handle protects against excessive heating, which increases the comfort of using the fireplace.

Insert with an interesting shape, with side glazing.

Thanks to the double-sided vision of the fire and the delicate front frame, it fits perfectly into the style of modern interiors. This type of fireplace is often chosen for open rooms where different spaces are combined, e.g. a living room with a dining room. The specially profiled bottom plate used in the fireplace allows it to accommodate a larger amount of wood. Modern solutions used in the device guarantee energy savings and make its operation and cleaning trouble-free.

MAXIMUM ENERGY USE

More effective combustion and longer temperature maintenance thanks to lining the combustion chamber with Acumotte, a heat-accumulating material that increases the temperature in the furnace.

Afterburning of fuel particles thanks to two deflectors that extend the exhaust gas path. This process also increases combustion efficiency and guarantees better energy use, thus minimizing the emission of harmful substances into the atmosphere.

The air supply to the insert takes place exclusively from the outside, thanks to the built-in air inlet pipe diameter 125 mm. Its regulation is carried out using a throttle set with one regulator located on pbelow the door, which excludes errors due to improper use. The entire mechanism works very quietly and trouble-free.

The insert uses a triple combustion chamber air supply system. Primary air, which facilitates the lighting of wood, is supplied under the grate. Secondary air - ensuring economical and ecological combustion - is supplied through holes in the rear wall.

In addition, the insert uses a clean glass system (air curtain), i.e. air is supplied directly to the glass through a system of channels located on the sides of the fireplace. In this way, oxygen is supplied to the upper part of the combustion chamber, where the gases produced in the wood combustion process are afterburned, which additionally reduces the emission of harmful CO into the atmosphere.

The use of such an air supply system enables very precise control of the combustion process.

ECOLOGICAL COMBUSTION

The device meets the requirements of Ecodesign and the BImSchV 2 standard, which determines the maximum CO emission.

SAFETY AT THE HIGHEST LEVEL

The front of the insert is equipped with heat-resistant ceramics that can withstand temperatures up to 660C. The glass we offer has a quality and safety certificate.

The body and front of the insert are resistant to high temperatures thanks to the use of high-quality steel.

Excellent tightness thanks to solid welds made in a noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.

COMFORTABLE USE

The fireplace uses a specially profiled bottom plate made of Acumotte, thanks to which the combustion chamber is deeper and accommodates a larger amount of wood.

The removable grate and ash pan make it easier to keep the insert clean.

Limited soot deposition occurs thanks to the clean glass system. An air curtain separates the glass from the fireplace. Thanks to this, it does not get dirty and gives off more heat to the room.

Possibility to compensate for unevenness of the ground and level the insert thanks to adjustable legs.

The model is equipped with a movable exhaust gas outlet, so during installation there is no need to purchase additional elbows. You can easily adjust the angle of connecting the insert to the chimney installation.

MODERN DESIGN

The insert is equipped with a single, decorative glass pane, thanks to which it looks elegant and modern. The use of this solution optically enlarges the front of the insert and emphasizes the vision of the fire.

The insert door has a convenient handle.