Steel fireplace KRATKI LUCY 16 kW Ø 200 installation kit
Description
Product offered:
LUCY 16 steel fireplace insert with panoramic glazing + INSTALLATION KIT
Catalogue number:
##LUCY/16/ASSEMBLY/ASSEMBLING##
Product information:
large front glazing
meets the requirements
ECOPROJECT
meets stringent German standards
BImSchV 2, determining the maximum CO emissions
ENERGY CLASS A
Movable exhaust gas outlet with 360° adjustment
, so during installation there is no need to purchase additional elbows
moving legs
, making it easier to level the insert
efficient combustion and longer temperature maintenance thanks to
lining the TERMOTEC combustion chamber
has
grate and ash pan, which makes it easier to keep the insert clean
contribution has
built-in air intake duct from the outside, diameter 125 mm
intended for
recuperation
wide range of heating power
from 7 to 20 kW
high
efficiency as high as 81%
panoramic glazing with
GLASS decorative glass
assembly kit
SET CONTAINS:
LUCY 16 kW air fireplace insert - 1 pc.
Snail clamp - 4 pcs
Max glue for insulating boards - 1 pc.
Joint glue - 3 pcs
Pins for mounting boards - 16 pcs.
Flex fi 125 degrees - 1 pc.
Base for insert - 1 pc.
Steel pipes for connecting the chimney: 1 meter fi 200 - 1 pc.
Steel pipes for connecting the chimney: 0.5 meters fi 200 - 1 pc.
Movable steel elbow, angle 90 degrees, diameter 200 - 1 pc.
Transition from the pipe to the ceramic chimney fi 200 - 1 pc.
Insulation boards for installation - 20 pcs.
LUFT black grille 9x80 - 2 pcs.
LUFT SF black grille 9x80 - 1 pc.
Rosette diameter 125 - 1 pc.
The installation kit was used by our installers to make the presented LUCY fireplace insert development.
Your fireplace can look just like our installers made it.
Technical data:
Nominal power (kW): 16
Heating power range (kW): 7-20
Plug diameter (mm): 200
Thermal efficiency (%): 81
CO emissions (at 13% O₂) ≤: 0.09%
Pollen emission (dust) (mg/Nm3): 20
Exhaust gas temperature °C: 260
Weight (kg): 213
Width (cm): 99.9
Height (cm): 120.3
Depth (cm): 42
Max log length (mm): 500
Material: steel
Type of fuel: recommended seasoned hardwood with humidity of <20%
Movable exhaust gas outlet.
Triple aeration system for the exhaust gas chamber.
Elegance and comfortable handle.
Adjusting the height of the legs.
Precise air damper control.
Built-in air intake.
Glass type decorative glass with an air curtain (clean glass system)
Termotec lining.
DECORATIVE GOLD AND SILVER HANDLES
The fireplace has the option of replacing the handles of the handles. In our other auctions you can equip yourself with a gold or silver handle. Excellent quality of the material and a special perforated structure ensure comfortable use.
ROTARY EXHAUST OUTLET
Possibility to change the exhaust gas outlet setting, which makes it easier to connect the insert. Adjusting the setting 360° allows you to connect the exhaust gas outlet at the back and at the top of the insert.
DECORATIVE GLASS GLASS
The insert is equipped with a single, decorative GLASS glass, thanks to which it looks elegant and modern. The use of this solution optically enlarges the front of the insert and emphasizes the vision of the fire.
REMOVABLE GRID
Allows access to the ash container, which makes it easier to keep the insert clean.
TERMOTEC LINING
The combustion chamber is lined with TERMOTEC heat-storing material, which increases the temperature in the fireplace. Thus, combustion is more ecological and the high temperature remains high for a longer time.
ADJUSTABLE FEET
They enable perfect leveling of the insert in relation to the ground during installation.
BUILT-IN AIR INTAKE ADJUSTMENT
The outside air supply is regulated using the built-in damper located below the door. The entire mechanism works inside the fireplace, very quietly and trouble-free.
INNOVATIVE HANDLE
The special perforated design of the handle protects against excessive heating, which increases the comfort of using the fireplace.
MAXIMUM ENERGY USE
The body and front of the insert are resistant to high temperatures thanks to the material used - high-quality steel.
Efficient combustion and longer temperature maintenance thanks to lining the combustion chamber with Termotec - a heat-accumulating material that increases the temperature in the chamber.
A system of two deflectors that extend the exhaust gas path, making combustion more ecological.
Supplying air only from the outside thanks to the built-in air intake pipe diameter 125 mm. Air inlet regulation using one regulator, which excludes errors due to improper use.
Triple combustion chamber air supply system: primary air - supplied under the grate; secondary air is supplied through holes in the rear wall. Additionally, the insert uses a clean glass system (air curtain).
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in a noble gas shield.
Steel elements laser cut using modern devices and then bent on CNC bending machines.
The front of the insert is equipped with heat-resistant glass that can withstand temperatures up to 660°C.
ECOLOGICAL COMBUSTION
The device meets the requirements of Ecodesign and the BImSchV 2 standard, which determines the maximum CO emission.
COMFORTABLE USE
The removable grate and ash pan make it easier to keep the insert clean.
Limited soot deposition thanks to the clean glass system (air deflector).
Can be used in various installation conditions, thanks to adjustable legs and a movable exhaust gas outlet with 360° adjustment.
MODERN DESIGN
Decorative glass that can withstand temperatures up to 660°C, which gives the fireplace a modern and elegant look and optically enlarges the front of the insert.
Elegant and comfortable handle.
Technical data
Rated output (kW) | 16 |
---|---|
Max length of logs (cm) | 50 |
Flue outlet diameter (mm) | 200 |
Materials | Steel |
Door opening direction | Left |
Energy class | A |
---|
Meets requirements | Ecodesign |
---|
Type of fuel | Seasoned deciduous wood (humidity ≤20%) |
---|---|
EAN | 5903751028123 |
Width (cm) | 99.9 |
---|---|
Height (cm) | 120.3 |
Depth (cm) | 42 |
Weight (kg) | 343.02 |