Steel fireplace KRATKI LUCY 15 kW Ø 200 installation kit

Product information:

large front glazing

meets ECODESIGN requirements

meets the strict German BImSchV 2 standards, which determine the maximum CO emissions

ENERGY CLASS A

Movable exhaust outlet with 360° adjustment, so there is no need to purchase additional elbows during installation

movable legs to facilitate leveling of the insert

efficient combustion and longer temperature maintenance thanks to

Termotec combustion chamber lining

has a grate and an ash pan, which makes it easier to keep the insert clean

the insert has a built-in external air intake connector, diameter 125 mm

intended for recuperation

wide range of heating power from 6.5 to 18.5 kW

high efficiency of up to 81%

panoramic glazing with GLASS decorative glass

assembly kit

The set includes:

LUCY 15 kW air fireplace insert - 1 pc.

Snail clamp - 4 pcs

Max glue for insulating boards - 1 pc.

Joint glue - 3 pcs

Pins for mounting boards - 16 pcs.

Flex fi 125 degrees - 1 pc.

Base for insert - 1 pc.

Steel pipes for connecting the chimney: 1 meter fi 200 - 1 pc.

Steel pipes for connecting the chimney: 0.5 meters fi 200 - 1 pc.

Movable steel elbow, angle 90 degrees, diameter 200 - 1 pc.

Transition from the pipe to the ceramic chimney fi 200 - 1 pc.

Insulation boards for installation - 20 pcs.

LUFT black grille 9x80 - 2 pcs.

LUFT SF black grille 9x80 - 1 pc.

Rosette diameter 125 - 1 pc.

The installation kit was used by our installers to create the presented LUCY fireplace insert.

Your fireplace can look just like our installers made it.

Technical data:

Nominal power (kW): 15

Heating power range (kW): 6.5-18.5

Plug diameter (mm): 200

Thermal efficiency (%): 81

CO emissions (at 13% O₂) ≤: 0.10%

Pollen emission (dust) (mg/Nm3): 19

Exhaust gas temperature °C: 263

Weight (kg): 205

Width (cm): 85.4

Height (cm): 134.6

Depth (cm): 42

Max log length (mm): 400

Material: steel

Type of fuel: recommended seasoned hardwood with humidity ≤20%

Movable exhaust gas outlet.

Triple aeration system for the exhaust gas chamber.

Elegance and comfortable handle.

Adjusting the height of the legs.

Precise air damper control.

Built-in air intake.

Glass type decorative glass with an air curtain (clean glass system)

Termotec lining.

DECORATIVE GOLD AND SILVER HANDLES

The fireplace has the option of replacing the handles of the handles. In our other auctions you can equip yourself with a gold or silver handle. Excellent quality of the material and a special perforated structure ensure comfortable use.

ROTARY EXHAUST OUTLET

Possibility to change the exhaust gas outlet setting, which makes it easier to connect the insert. 360° adjustment allows you to connect the exhaust gas outlet at the back or top of the insert.

DECORATIVE GLASS GLASS

The insert is equipped with a single, decorative GLASS glass, thanks to which it looks elegant and modern. The use of this solution optically enlarges the front of the insert and emphasizes the vision of the fire.

REMOVABLE GRID

Allows access to the ash container, which makes it easier to keep the insert clean.

TERMOTEC LINING

The combustion chamber is lined with TERMOTEC heat-storing material, which increases the temperature in the fireplace. Thus, combustion is more ecological and the high temperature remains high for a longer time.

CLEAN GLASS SYSTEM

The air guide, which is mounted on the top of the insert front, limits the deposition of soot.

ADJUSTABLE FEET

They enable perfect leveling of the insert in relation to the ground during installation.

BUILT-IN AIR INTAKE ADJUSTMENT

The outside air supply is regulated using the built-in damper located below the door. The entire mechanism works inside the fireplace, very quietly and trouble-free.

INNOVATIVE HANDLE

The special perforated design of the handle protects against excessive heating, which increases the comfort of using the fireplace.

MAXIMUM ENERGY USE

The body and front of the insert are resistant to high temperatures thanks to the material used - high-quality steel.

Efficient combustion and longer temperature maintenance thanks to lining the combustion chamber with Termotec - a heat-accumulating material that increases the temperature in the chamber.

A system of two deflectors that extend the exhaust gas path, making combustion more ecological.

Deliver air intake only from the outside thanks to the built-in 125 mm air intake spigot. Air inlet regulation using one regulator, which excludes errors due to improper use.

Triple combustion chamber air supply system: primary air - supplied under the grate; secondary air is supplied through holes in the rear wall. Additionally, the insert uses a clean glass system (air curtain).

SAFETY AT THE HIGHEST LEVEL

Excellent tightness thanks to solid welds made in a noble gas shield.

Steel elements laser cut using modern devices and then bent on CNC bending machines.

The front of the insert is equipped with heat-resistant glass that can withstand temperatures up to 660°C.

ECOLOGICAL COMBUSTION

The device meets the requirements of Ecodesign and the BImSchV 2 standard, which determines the maximum CO emission.

COMFORTABLE USE

The removable grate and ash pan make it easier to keep the insert clean.

Limited soot deposition thanks to the clean glass system (air deflector).

Can be used in various installation conditions, thanks to adjustable legs and a movable exhaust gas outlet with 360° adjustment.

MODERN DESIGN

Decorative glass that can withstand temperatures up to 660°C, which gives the fireplace a modern and elegant look and optically enlarges the front of the insert.

Elegant and comfortable handle.