• PRO
  • BImSchV 2

Water heating fireplace KRATKI NADIA PW 12 kW Ø 200 black thermotec lining

Beteckningar
Sku NADIA/PW/10/W/BLACK
Specifikation
Nominell effekt (kW) 12
Värmeeffektivitet (%) 82
Uppfyller kraven
  • KRATKI PRO
  • Ekodesign
  • Designad för återhämtning
  • Efterlevnad av Bimschv 2
Waga 190
Frakt
Tillgänglighet 60 dagars genomförande W produkcji
Förväntat leveransdatum 24.01 - 27.01
Frakt från 733,62 kr
Eller betala direkt:
24 222,45 kr
Priset inkluderar moms

Beskrivning

 

MAXIMUM USE OF ENERGY

More efficient combustion and longer temperature retention thanks to the lining of the combustion chamber with TERMOTEC, a heat-accumulating material that increases the temperature in the furnace.

Afterburning of fuel particles thanks to two deflectors that extend the flue gas path. This process also increases combustion efficiency and guarantees better energy utilization, thus minimizing the emission of harmful substances into the atmosphere.

Air is supplied to the fireplace stove only from the outside thanks to a 125 mm air inlet pipe. It is regulated by a throttle set with a single control located below the door, which excludes errors in improper use. The whole mechanism works very quietly and failure-free.

The fireplace stove is equipped with a double system of air supply to the combustion chamber. The primary air, which makes it easier to ignite wood, is supplied under the grate.

In addition, the clean glass system (air curtain) is used in the inset, i.e. the air is supplied directly to the glass through a system of ducts located on the sides of the fireplace. In this way oxygen is supplied to the upper part of the combustion chamber where the gases produced during wood combustion are afterburnt, which additionally limits the emission of harmful CO into the atmosphere.

The use of such an aeration system enables very precise control of the combustion process.

 

ECOLOGICAL COMBUSTION

The device meets the requirements of Ecodesign and BImSchV 2 standard determining the maximum CO emission.

 

SAFETY AT THE HIGHEST LEVEL

The front of the insert is equipped with heat-resistant ceramics which can withstand temperatures of up to 660°C. The glass we offer is certified for quality and safety.

A perforated handle protects it from overheating, which contributes to the high comfort of using the fireplace.

The body and front of the insert are resistant to high temperatures thanks to the use of high-quality steel.

Excellent tightness, thanks to solid welds made in a noble gas shield. Steel elements are laser cut using modern equipment and then bent on CNC bending machines.

 

COMFORTABLE USE

The fireplace is equipped with a specially profiled bottom plate made of TERMOTEC material which makes the combustion chamber deeper and accommodates more wood.

Removable grate and ash pan make it easy to keep the fireplace clean.

Soot deposition is reduced thanks to the clean glass system. The air curtain separates the glass from the fireplace. Thanks to this it does not get dirty and gives more heat to the room.

The adjustable feet make it possible to level the stove and even out uneven surfaces.

This model is equipped with a movable smoke outlet, so there is no need to buy additional elbows in case of installation. You can easily adjust the angle of connection to the chimney installation.

 

MODERN DESIGN

The fireplace stove is equipped with two doors at the front and back (instead of a back wall) so the heat radiates in two directions.

This type of fireplace is often chosen to be installed between adjacent rooms, such as living room and dining room or bedroom.

The insert is equipped with a single, decorative glass pane, which makes it look elegant and modern. The use of this solution optically enlarges the front of the insert and emphasizes the vision of fire.

The door of the insert has a convenient handle. Lining - black Termotec.

Tekniska data

Ogólne
Nominell effekt (kW)12
Värmeeffektområde (kW)5.0 - 13.5
Värmeeffektivitet (%)82
Max arbetstryck (bar)2
Vattenkapacitet (l)32
Avgastemperatur (℃)225
Max längd på stockar (cm)35
Minsta utloppsnät aktivt fält (cm2)438
Minsta inloppsgaller aktivt fält (cm2)219
DörröppningssystemVänster
MaterialStål
SjälvförslutningFalse
Rökkanalens utloppsdiameter (mm)200
Efektywność Energetyczna
EnergiklassA+
Medeleffekt från vatten (kW)4.7
Termisk effekt för uppvärmning av rum (kW)7.3
Energieffektivitetsindex (EEI)108.01
Dammutsläpp (mg/Nm3)37
CO-utsläpp (vid 13 % O 2 ) ≤ angivet i %0.1
Certyfikaty / Zgodność
Uppfyller kravenKRATKI PRO, Ekodesign, Designad för återhämtning, Efterlevnad av Bimschv 2
Informacje dodatkowe
EAN5901350034316
Design egenskaperDekorativt glas, Förbränningskammarfoder, Luftintag - inbyggt
Typ av bränsleKryddat lövved (fuktighet ≤20%)
Parametry fizyczne
Bredd (cm)68.4
höjd (cm)139
Djup (cm)41.6
Waga190

Kundrecensioner

Bli den första att recensera denna produkt
Har du denna produkt?
Betygsätt Water heating fireplace KRATKI NADIA PW 12 kW Ø 200 black thermotec lining och hjälp andra att göra ett val.

Butiksrecensioner

Du recenserar: Water heating fireplace KRATKI NADIA PW 12 kW Ø 200 black thermotec lining

Tooltip

    Garanti och returer

    Garanti

    All products on www.kratki.com are brand new, free from physical and legal defects and have been legally launched on the Polish market. The manufacturer gives a 5-year warranty on the proper functioning of the fireplace stove from the moment of its purchase. Fireplace grates and seals are covered by a guarantee for a period of 1 year from the time of purchasing the fireplace stove. The guarantee does not cover: heat resistant ceramics. The use of the fireplace stove, method of installation to the chimney, and operating conditions must be in accordance with the instruction manual.

    Returnerar

    A Customer who is a Consumer who has signed a Sales Agreement can withdraw from it within 14 days without giving any reason. The deadline for withdrawal from the Sales Agreement starts at the moment the Goods are taken possession of by the Client or a third party indicated by the Client other than the carrier. The declaration can be made on a form, a sample of which has been placed by the Seller on the website of the Store at the address: withdrawal form.

    Rekommenderade produkter

    Newsletter background image

    Fraktmetoder

    Betalningsmetoder

    Copyright © 2023 kratki.com Wszelkie prawa zastrzeżone