- BImSchV 2
Steel fireplace KRATKI LUCY SLIM EKO right 8 kW Ø 160 installation kit
- KRATKI PRO
- Ekodesign
- Designad för återhämtning
- Efterlevnad av Bimschv 2
Beskrivning
Product offered:
Steel corner fireplace insert LUCY 12 SLIM right BS 8kW with a shallow combustion chamber and decorative glass + INSTALLATION KIT
Catalogue number:
##LUCY/12/SLIM/P/BS/ZESTAW/MONT##
Product information:
meets the requirements
ECO DESIGN
meets stringent German standards
, determining the maximum CO
emissionENERGY CLASS A +
Movable exhaust gas outlet with 360° adjustment
, so during installation there is no need to purchase additional elbows
moving legs
, facilitating leveling of the insert
efficient combustion and longer temperature maintenance thanks to
the THERMOTEC combustion chamber lining
has
which makes it easier to keep the insert clean
contribution has
outside fi 125 mm
intended for
recuperation
wide range of heating power from
3 to 10 kW
high
efficiency up to 83%
panoramic glazing
<GLASS decorative glass
assembly kit
SET CONTAINS:
LUCY SLIM air fireplace insert, RIGHT BS 12 kW - 1 pc.
Snail clamp - 4 pcs
Max glue for insulating boards - 1 pc.
Joint glue - 3 pcs
Pins for mounting boards - 16 pcs.
Flex fi 125 degrees - 1 pc.
Base for insert - 1 pc.
Steel pipes for connecting the chimney: 1 meter fi 160 - 1 pc.
Steel pipes for connecting the chimney: 0.5 meters diameter 160 - 1 pc.
Movable steel elbow, angle 90 degrees, diameter 160 - 1 pc.
Transition with reduction from the pipe system fi 160/200 - 1 pc.
Insulation boards for installation - 20 pcs.
LUFT black corner grille, right 9x40x60 - 2 pcs.
LUFT SF corner grille, left, black, 9x40x60 - 1 pc.
Rosette diameter 125 - 1 pc.
90° steel frame for the insert - 1 pc.
Connection to grille 17/17 fi 125 - 1 pc.
Grid 17/17 white - 1 pc.
The installation kit was used by our installers to create the presented LUCY fireplace insert.
Your fireplace can look just like our installers made it
Technical data:
Nominal power (kW): 8
Heating power range (kW): 3-10
Plug diameter (mm): 160
Thermal efficiency (%): 83
CO emissions (at 13% O₂) ≤: 0.09%
Pollen emission (dust) (mg/Nm3): 9
Exhaust gas temperature °C: 180
Weight (kg): 171.0
Width (cm): 78.1
Height (cm): 128.2
Depth (cm): 41.5
Max log length (mm): 350
Material: steel
Type of fuel: recommended seasoned hardwood with humidity ≤20%
Movable exhaust gas outlet.
Triple aeration system for the exhaust gas chamber.
Elegance and comfortable handle.
Adjusting the height of the legs.
Precise air damper control.
Built-in air intake.
Glass type decorative glass with an air curtain (clean glass system)
Termotec lining.
DECORATIVE GOLD AND SILVER HANDLES
The fireplace has the option of replacing the handles of the handles. In our other auctions you can equip yourself with a gold or silver handle. Excellent quality of the material and a special perforated structure ensure comfortable use.
ROTARY EXHAUST OUTLET
Possibility to change the exhaust gas outlet setting, which makes it easier to connect the insert. 360° adjustment allows you to connect the exhaust gas outlet at the back or top of the insert.
DECORATIVE GLASS GLASS
The insert is equipped with a single, decorative GLASS glass, thanks to which it looks elegant and modern. The use of this solution optically enlarges the front of the insert and emphasizes the vision of the fire.
REMOVABLE GRID
Allows access to the ash container, which makes it easier to keep the insert clean.
THERMOTEC LINING
The combustion chamber is lined with THERMOTEC heat-storing material, which increases the temperature in the fireplace. Thus, combustion is more ecological and the high temperature remains high for a longer time.
CLEAN GLASS SYSTEM
The air guide, which is mounted on the top of the insert front, limits the deposition of soot.
ADJUSTABLE FEET
They enable perfect leveling of the insert in relation to the groundy performing assembly.
BUILT-IN AIR INTAKE ADJUSTMENT
The outside air supply is regulated using the built-in damper located below the door. The entire mechanism works inside the fireplace, very quietly and trouble-free.
INNOVATIVE HANDLE
The special perforated design of the handle protects against excessive heating, which increases the comfort of using the fireplace.
An interestingly shaped insert with side glazing and a shallow combustion chamber, making it perfect for living rooms with a small area and low heating power demand. Thanks to the double-sided vision of the fire and the delicate front frame, it fits perfectly into the style of modern interiors. Modern solutions used in the fireplace guarantee energy savings and make the operation and cleaning of the device trouble-free.
MAXIMUM ENERGY USE
More efficient combustion and longer temperature maintenance thanks to lining the combustion chamber with THERMOTEC, a heat-accumulating material that increases the temperature in the furnace.
Afterburning of fuel particles thanks to two deflectors that extend the exhaust gas path. This process also increases combustion efficiency and ensures better energy use, thus minimizing the emission of harmful substances into the atmosphere.
The air supply to the insert takes place exclusively from the outside, thanks to the built-in air inlet nozzle diameter of 125 mm. Its regulation is carried out using a damper set with one regulator located below the door, which excludes errors due to improper use. The entire mechanism works very quietly and trouble-free.
The insert uses a triple combustion chamber air supply system. Primary air, which facilitates the lighting of wood, is supplied under the grate. Secondary air - ensuring economical and ecological combustion - is supplied through holes in the rear wall.
In addition, the insert uses a clean glass system (air curtain), i.e. air is supplied directly to the glass through a system of channels located on the sides of the fireplace. In this way, oxygen is supplied to the upper part of the combustion chamber, where the gases produced in the wood combustion process are afterburned, which additionally reduces the emission of harmful CO into the atmosphere.
The use of such an air supply system enables very precise control of the combustion process.
ECOLOGICAL COMBUSTION
The device meets the requirements of Ecodesign and the BImSchV 2 standard, which determines the maximum CO emission.
SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that can withstand temperatures up to 660°C. The glass we offer has a quality and safety certificate.
The body and front of the insert are resistant to high temperatures thanks to the use of high-quality steel.
Excellent tightness thanks to solid welds made in a noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.
COMFORTABLE USE
In SLIM fireplaces, the combustion chamber is much shallower. At the same time, thanks to the deepened bottom, it holds a sufficient amount of wood. Therefore, emptying the ash from the furnace is much less frequent. In addition, the removable grate and ash pan make it easier to keep the insert clean.
Limited soot deposition occurs thanks to the clean glass system. An air curtain separates the glass from the fireplace. Thanks to this, it does not get dirty.
Possibility to compensate for uneven floors and level the insert thanks to adjustable legs.
The model is equipped with a movable exhaust gas outlet, so during installation there is no need to purchase additional elbows. You can easily adjust the angle of connecting the insert to the chimney installation.
MODERN DESIGN
An insert with a modern panoramic front and a shallow combustion chamber, making it perfect for living rooms with a small area and low demand for heating power. Perfect for energy-efficient and passive houses. Modern solutions used in the fireplace guarantee energy savings and make the operation and cleaning of the device trouble-free.
The insert is equipped with a single, decorative glass pane, thanks to which it looks elegant and modern. The use of this solution optically enlarges the front of the insert and emphasizes the vision of the fire.
The insert door has a convenient handle.
Tekniska data
Nominell effekt (kW) | 8 |
---|---|
Värmeeffektområde (kW) | 3.0 - 10.0 |
Värmeeffektivitet (%) | 83 |
Avgastemperatur (℃) | 180 |
Max längd på stockar (cm) | 35 |
Minsta inloppsgaller aktivt fält (cm2) | ≥500 |
Minsta utloppsnät aktivt fält (cm2) | ≥700 |
Rökkanalens utloppsdiameter (mm) | 160 |
Färg | Svart |
Material | Stål |
Dörröppningssystem | Höger |
Energiklass | A+ |
---|---|
Energieffektivitetsindex (EEI) | 109.3 |
Termisk effekt för uppvärmning av rum (kW) | 8 |
CO-utsläpp (vid 13 % O 2 ) ≤ angivet i % | 0.09 |
Dammutsläpp (mg/Nm3) | 9 |
Uppfyller kraven | KRATKI PRO, Ekodesign, Designad för återhämtning, Efterlevnad av Bimschv 2 |
---|
Design egenskaper | Askpanna, Dekorativt glas, Förbränningskammarfoder, Luftintag - inbyggt |
---|---|
Typ av bränsle | Kryddat lövved (fuktighet ≤20%) |
EAN | 5903751028086 |
Bredd (cm) | 78.1 |
---|---|
höjd (cm) | 128.2 |
Djup (cm) | 41.5 |
Waga | 306.43 |
Kundrecensioner
Garanti och returer
A Customer being a Consumer, who has concluded the Sales Contract may rescind thereof within a period of 14 days without giving any reasons. The time limits run for the rescission of the Sales Contract shall commence at the time of acquiring the Goods by the Customer or a third party of their choice, other, however, than a carrier. The representations may be submitted in a form whose template has been published by the Seller at the Online Shop Website.