Connection with a fan

A fan grille connection improves the heating efficiency, forces air circulation in domestic systems. It distributes warm air to uncooled rooms and rooms other than the one with the fireplace. The fan connection fits any 17/17 grille with or without louvres. Complete with an assembly frame and a Ø100 conduit connection. In addition, it has absorbers, which suppress vibrations. The fan is equipped with a thermistor.

The connection is equipped with a thermal sticker.

Principle of operation: when the air temperature exceeds ca. 35°C, the temperature sensor activates the fan. In the event of further temperature increases, fan rotations will also increase and reach their maximum for a temperature of ca. 40°C. When the air temperature decreases down to ca. 33°C, the fan turns off.

NOTE! A power supply has to be purchased for the connection. Should you purchase a power supply from outside of our offer, remember it should be 1.0A. Additionally, prior to operating, it should be thoroughly checked each time in terms of the set voltage range, especially, if it has set parameters, and polarity.

FEATURES:

Minimum distance from fireplace enclosure: 3 metres horizontally

Resistance: up to 80°C

Dimensions: 120x120x25mm

Air flow: ~65 CFM (~110,5 m3h)

Rated voltage: 12 VDC

Current: 0.2 A

Rotations: 1500 RPM +/- 10%

Bearing: FDB Bearing System

Noise: 21 dBa.