Betegnelser
Sku AQUARIO/M/12/PW/W/DG
Spesifikasjon
Rated output (kW) 12
Heating efficiency (%) 86
Meets requirements
  • Ecodesign
  • Designed for recuperation
  • BImSchV 2
Waga 210
Frakt
Tilgjengelighet 14 dager med implementering W produkcji
Forventet leveringsdato 25.11 - 26.11
Frakt fra 1 111,19 PLN
Eller betal direkte:
2 341,12 PLN
Prisen inkluderer mva

Beskrivelse

MAXIMUM USE OF ENERGY

Aquario insert is a water-jacket device with a corpus built of double steel walls. The space between them is filled with water that receives heat and transfers it to the heating system.

Efficient burning process and maintaining of temperature to keep the warmth for longer thanks to lining of combustion chamber with TERMOTEC - heat accumulating material which raises the temperature in the combustion chamber.

Special water system which allows that big amount of the heat from fumes is transferred into heating system, thanks to that high energy efficiency is obtained.

More ecological combustion thanks to double deflector system which extends the exhaust gas path.

Double-damper regulation of fumes outlet: upper damper which allows to regulate chimney draught, bottom damper which switches the insert between firing-up stage to burning process.

The combustion chamber ventilation system is operated exclusively from the outside by supplying primary and secondary air to the combustion chamber. As standard, the insert has an external air inlet of 125 mm diameter which allows fresh air to be supplied to the furnace from the outside of the building. The air separation takes place in the spaces below the bottom plate of the hearth. The air is supplied by a canal at the height of the lower plate to the fence, which is fitted with the system of holes through the entire length.. This contributes to improvement combustion conditions. Burning takes place evenly over the entire width of the hearth. Adjustment of combustion intensity in the insert is made by means of the mechanism below the door.

The insert has an air curtain, so called clean window system without taking out air from the room. This is a special aeration of glass to keep it clean. The air is taken out through the air inlet connector and then supplied with special ducts in the sides of the appliance to the chamber lying in the top of the insert. Then it is evenly distributed on the glass, so it stays clean.

The afterburning system is responsible for limiting the harmful emissions to the environment and improving the efficiency of the insert. Thanks to this solution, the inserts achieve very good CO emission parameters (low CO emission).

Fireplace with double glass version which improves more efficient heating radiation to the rooms as well as ensures less fireplace glazing contamination.

 

SAFETY AT THE HIGHEST LEVEL

The front of the insert is equipped with double heat resistant ceramics resisting temperatures up to 660°C. Our glass is certified for quality and safety.

Protection against overheating by the built-in coil pipe - connector input / output 1/2”. The body of the fireplace is reinforced by pins.

Body and front of the insert resistant to high temperatures thanks to the use of high quality steel.

Perfect tightness thanks to the solid welds made in a noble gas shielding. All steel elements are laser cut and bent on CNC bending machines.

 

CONVENIENT TO USE

Grateless fireplace insert - full combustion on the dust what means that firewood burns into fine ash at minimum amount. Obtained thermal energy from firewood is exploited to the maximum.

Reduced soot deposition through a system of pure glass (air curtain).

It can be used in a various mounting conditions thanks to adjustable legs.

 

MODERN DESIGN

The built-in insert with a water system does not look different from a typical air insert. It only extends the advantages of the latter to the possibility of connecting the fireplace to the system of central heating.

The insert is equipped with decorative glass, which makes it look elegant and modern. In addition, the use of this solution optically enlarges the front of the insert.

The insert is fitted with an elegant and comfortable handle.

 

Tekniske data

Ogólne
Rated output (kW)12
Heating power range (kW)5.0 - 15.0
Heating efficiency (%)86
Max working pressure (bar)2
Water capacity (l)47
Exhaust gas temperature (℃)185
Max length of logs (cm)45
Min outlet grids active field (cm2)240
Min inlet grids active field (cm2)120
Door opening directionLeft
MaterialsSteel
Self ClosureFalse
Flue outlet diameter (mm)180
Efektywność Energetyczna
Energy classA+
Average power from water (kW)8
Termisk effekt for romoppvarming (kW)4
Energy efficiency index (EEI)113.2
Dust emission (mg/Nm3)26
CO emissions (at 13% O 2 ) ≤ given in %0.09
Certyfikaty / Zgodność
Meets requirementsEcodesign, Designed for recuperation, BImSchV 2
Informacje dodatkowe
EAN5901350006344
Design featuresAir intake - built in , Combustion chamber lining, Decorative glass
Type of fuelSeasoned deciduous wood (humidity ≤20%)
Parametry fizyczne
Width (cm)64.5
Height (cm)120.1
Depth (cm)40
Waga210

Kundeanmeldelser

Vær den første til å anmelde dette produktet
Har du dette produktet?
Vurder Water heating fireplace KRATKI AQUARIO M 12 kW Ø 180 Double glass og hjelp andre med å ta et valg.

Store reviews

Du omtaler: Water heating fireplace KRATKI AQUARIO M 12 kW Ø 180 Double glass

Tooltip

    Garanti og returer

    Garanti

    All products on www.kratki.com are brand new, free from physical and legal defects and have been legally launched on the Polish market. The manufacturer gives a 5-year warranty on the proper functioning of the fireplace stove from the moment of its purchase. Fireplace grates and seals are covered by a guarantee for a period of 1 year from the time of purchasing the fireplace stove. The guarantee does not cover: heat resistant ceramics. The use of the fireplace stove, method of installation to the chimney, and operating conditions must be in accordance with the instruction manual.

    Returnerer

    A Customer who is a Consumer who has signed a Sales Agreement can withdraw from it within 14 days without giving any reason. The deadline for withdrawal from the Sales Agreement starts at the moment the Goods are taken possession of by the Client or a third party indicated by the Client other than the carrier. The declaration can be made on a form, a sample of which has been placed by the Seller on the website of the Store at the address: withdrawal form.

    Anbefalte produkter

    Newsletter background image

    Fraktmetoder

    Betalingsmetoder

    Copyright © 2023 kratki.com Wszelkie prawa zastrzeżone