Steel fireplace KRATKI LUCY left 14 kW Ø 200 installation kit

Product information:

meets ECODESIGN requirements
producer Kratki
meets the restrictive German BImSchV 2 standards, which determine the maximum CO emissions
ENERGY CLASS A
movable exhaust gas outlet with 360° adjustment, thanks to which in case of installation, there is no need to purchase additional elbows
Moveable legs, making it easier to level the insert
Efficient combustion and longer temperature maintenance thanks to the Acumotte combustion chamber lining
It has a grate and an ash pan, which makes it easier to keep the insert clean< br />the insert has a built-in external air inlet connector fi 125 mm
intended for heat recovery
wide range of heating power from 6 to 17 kW
high efficiency of up to 81%
panoramic glazing with GLASS decorative glass
installation kit

We have various models of air inserts at our auctions.

SET INCLUDES:
Lucy 14 fireplace insert with inlet.
Flex fi 125 degrees.
Base for the insert.
Steel pipes for connecting the chimney: 1m x 2 and 0, 5 m x 2, both diameter 200
Movable steel elbow, 90 degree angle, diameter 200
Transition from the pipe to the ceramic chimney diameter 180 to the hole diameter 200
A damper with a pull rod
Building plates 15 pcs.
Pins for mounting boards 12 pcs.
Max glue for insulating boards. 1 pc.
Joint glue - 4 pcs
Snail clamp 2 pcs.
Luft grilles
Insulating tape, resistant to high temperatures.

The installation kit was used by our installers to create the presented LUCY fireplace insert.

Your fireplace can look just like our installers made it.

Cartridge technical data:

Nominal power (kW): 14

Heating power range (kW): 6-17

Plug diameter (mm): 200

Thermal efficiency (%): 81

CO emissions (at 13% O₂) ≤: 0.10%

Pollen emission (dust) (mg/Nm3): 18

Exhaust gas temperature °C: 265

Weight (kg): 225

Width (cm): 84.8

Height (cm): 127

Depth (cm): 44

Max log length (mm): 400

Material: steel

Type of fuel: recommended seasoned hardwood with humidity ≤20%

ROTARY EXHAUST OUTLET

Possibility to change the exhaust gas outlet setting, which makes it easier to connect the insert. 360° adjustment allows you to connect the exhaust gas outlet at the back or top of the insert.

DECORATIVE GLASS GLASS

The insert is equipped with a single, decorative GLASS glass, thanks to which it looks elegant and modern. The use of this solution optically enlarges the front of the insert and emphasizes the vision of the fire.

REMOVABLE GRID

Allows access to the ash container, which makes it easier to keep the insert clean.

ACUMOTTE LINING

The combustion chamber is lined with ACUMOTTE heat-storing material, which increases the temperature in the fireplace. Thus, combustion is more ecological and the high temperature remains high for a longer time.