Cast iron fireplace KRATKI ANTEK 10 kW Ø 180 installation kit
Beskrivelse
Product information:
insert made of cast iron
producer Kratka
minimum thickness of cast iron 8 mm
heating power range from 6 to 13kW
ENERGY CLASS A
has a grate and an ash pan, which makes it easier to keep the insert clean
clean glass system (air guide) reduces soot deposition
built-in deflector that extends the exhaust gas path
cold handle system, allows you to remove the handle when lighting the fireplace
built-in damper regulates the chimney draft force
air intake optional - can be purchased as a set
the front is equipped with heat-resistant ceramics that can withstand temperatures up to 660°C.
kit for installing a fireplace at home
We have various models of these inserts at our auctions.
SET CONTAINS:
Antek cast iron fireplace insert 10 kW - 1 pc.
Inlet - 1 pc.
Transition from 90° inlet - 1 pc.
Flex fi 125 degrees - 1 pc.
Base for insert - 1 pc.
Steel pipes for connecting the chimney: 1 meter fi 180 - 1 pc.
Steel pipes for connecting the chimney: 0.5 meters diameter 180 - 1 pc.
Movable steel elbow, angle 90 degrees, diameter 180 - 1 pc.
Transition from the pipe to the ceramic chimney fi 180 to the hole fi 200 - 1 pc.
Throttle with rod - 1 pc.
Insulation boards for installation - 20 pcs.
Pins for mounting boards - 16 pcs.
Max glue for insulating boards - 1 pc.
Joint glue - 3 pcs
Snail clamp - 4 pcs
LUFT SF black grille 9x60 - 1 pc.
LUFT black grille 9x60 2 pcs
Inlet-pipe transition fi 125 - 1 pc.
The installation kit was used by our installers to install the fireplace insert below.
Your fireplace may look like this.
If you want to change or add an element to the set, you will find a wide selection of fireplace accessories on our other auctions.
Cartridge technical data:
Nominal power (kW): 10
Heating power range (kW): 6-13
Plug diameter (mm): 180
Thermal efficiency (%): 70
CO emissions (at 13% O₂) ≤: 0.14%
Pollen emission (dust)*: 22
Exhaust gas temperature °C: 310
Weight (kg): 91
Width (cm): 60
Height (cm): 62.2
Depth (cm): 33.4
Max log length (mm): 330
Material: cast iron
Fuel type: seasoned hardwood recommended
* mg/Nm3
DIY CONSTRUCTION BOARDS
The set includes boards resistant to high temperatures, which you can use to easily build the fireplace.
The casing is made of these boards conveniently and quickly.
Built-in damper
Allows you to adjust the chimney draft, which makes the combustion process more effective. Adjustment is possible using the knob.
COLD HANDLE SYSTEM
The handle on this fireplace insert can be removed while burning, which will ensure that it does not heat up.
ASH DRAWER
Makes it easier to keep the insert clean. The knob at the front of the drawer allows you to regulate the air flow from the room. Additionally, the fence placed in the insert prevents the wood from falling out.
BUILT-IN DEFLECTOR
Afterburning of fuel particles thanks to a deflector that extends the exhaust gas path. This process also increases combustion efficiency and ensures better energy use, thus minimizing the emission of harmful substances into the atmosphere.
THICKLY AROUND RADIATORS
Maximum use of heat is achieved thanks to densely arranged radiators on the walls of the fireplace insert.
VALUABLE INFORMATION
STRONG MATERIAL
Our fireplace uses maximum heat. You can be sure that the thickness of the cast iron is optimal, certified to the highest European standard. Our cast iron is up to 8 mm thick.
HIGH TEMPERATURE RESISTANT GLASS
The classic front of the insert is equipped with heat-resistant ceramics that can withstand temperatures up to 660°C.
MAXIMUM ENERGY USE
Afterburning of fuel particles thanks to a deflector that extends the exhaust gas path. Increased efficiency of the insert thanks to manual regulation of the chimney draft using the built-in damper. Manual control of the combustion process is carried out via the ash pan slider.
SAFETY AT THE HIGHEST LEVEL
The decorative fence makes it easier to keep the furniture clean and protects it from falling out.
COMFORTABLE USE
Cold handle system that reduces the risk of burns by allowing you to remove it while smoking.
Ash drawer/container for collecting burnt wood residues and a movable grate that facilitates ash removal.
Reduction of soot deposition thanks to clean glass system (air deflector).
RECOMMENDED FUEL
Logs of deciduous trees such as: beech, hornbeam, oak, alder, birch, ash, etc. with the dimensions of logs or logs: length approx. 30 cm and circumference from approx. 30 cm to 50 cm - moisture content of the wood used to heat the device should not exceed 20%.
VENTILATION GRATES
Be sure to buy this so that your fireplace works properly and has adequate ventilation. Our fireplace has a specific
LIGHTING
Light the kindling and close the fireplace door. Depending on the length of the chimney and its draft, lighting may take from a few to several minutes. In case of insufficient draft in the chimney, in the initial stage of lighting the fireplace, open the fireplace door by opening it. It is also a good idea to open the window in the room where the fireplace is installed to let more air in (only in the case of devices that do not have a built-in air intake from the outside)
REMEMBER!
Our fireplace insert comes with an instruction manual in which you will find all information regarding operation and installation.
Tekniske data
Rated output (kW) | 10 |
---|---|
Heating power range (kW) | 4.5 - 13 |
Heating efficiency (%) | 76 |
Exhaust gas temperature (℃) | 300 |
Max length of logs (cm) | 33 |
Min inlet grids active field (cm2) | ≥500 |
Min outlet grids active field (cm2) | ≥700 |
Flue outlet diameter (mm) | 180 |
Color | Black |
Materials | Cast iron |
Door opening direction | Left |
Energy class | A |
---|---|
Energy efficiency index (EEI) | 100.2 |
Seasonal Heating efficiency (%) | 66 |
Termisk effekt for romoppvarming (kW) | 10 |
CO emissions (at 13% O 2 ) ≤ given in % | 0.135 |
Emisja CO (mg/m3) | 1681 |
Dust emission (mg/Nm3) | 22 |
Emisja NOx (mg/Nm3) | 116 |
Emisja OGC (mg/Nm3) | 80 |
Flue gases mass flow rate (g/s) | 9.1 |
Meets requirements | Ecodesign |
---|
Design features | Air intake - additional option, Ashpan |
---|---|
Type of fuel | Seasoned deciduous wood (humidity ≤20%) |
EAN | 5903751040927 |
Width (cm) | 60 |
---|---|
Height (cm) | 62.2 |
Depth (cm) | 33.4 |
Waga | 225.08 |
Kundeanmeldelser
Garanti og returer
All products on www.kratki.com are brand new, free from physical and legal defects and have been legally launched on the Polish market. The manufacturer gives a 5-year warranty on the proper functioning of the fireplace stove from the moment of its purchase. Fireplace grates and seals are covered by a guarantee for a period of 1 year from the time of purchasing the fireplace stove. The guarantee does not cover: heat resistant ceramics. The use of the fireplace stove, method of installation to the chimney, and operating conditions must be in accordance with the instruction manual.
A Customer being a Consumer, who has concluded the Sales Contract may rescind thereof within a period of 14 days without giving any reasons. The time limits run for the rescission of the Sales Contract shall commence at the time of acquiring the Goods by the Customer or a third party of their choice, other, however, than a carrier. The representations may be submitted in a form whose template has been published by the Seller at the Online Shop Website.