Rated output (kW) 12
Heating efficiency (%) 81
Meets requirements
  • Ecodesign
  • BImSchV 2
Availability 1 day of implementation Medium Stock: 29
Expected delivery date 24.07 - 25.07
Shipping from €71.97
Or pay directly:
Front type
Flue outlet diameter (mm)
Front facing
Corner left
Corner right
From €927.57
Price includes VAT


The ZUZIA ECO series are cast iron inserts with a spacious combustion chamber, which are additionally equipped with densely spaced radiators. Thanks to this solution, the surface of heat transfer to the room is much bigger. This increases the mass of the device itself. The insert has a system of post-combustion of fumes that has not been burnt before, which, along with other technical solutions, has a very good combustion efficiency, which makes the insert meet the strict requirements of the Eco-design.



Cast iron front of the insert is equipped with heat-resistant ceramics with a temperature of up to 660°C. The glass is certified for quality and safety.



The device is additionally equipped with a clean glass system - thanks to the so-called air curtain. The air stream is distributed evenly, sweeps the glass and minimizes the deposition of soot on it. This allows you to maintain a attractive and clean window for a long time.

Keeping the insert clean is easier with a fitted grate and a container where the ash is collected. In addition, the insert has a removable fence, which prevents the wood from falling out of the hearth and makes cleaning of the fireplace easier.



Burning of fuel particles is accomplished due to the equipped deflector which extends the exhaust path. This process also increases the efficiency of combustion and guarantees a better use of energy and at the same time minimizes the emission of harmful substances into the atmosphere.

The device has a triple combustion chamber venting system, therefore the wood burning process in the insert is ecological and most importantly economical.

The supply of primary air to the insert is performed from the outside due to the built-in air inlet (in size of 125 mm). The air intake is located in the bottom part of the insert.

Secondary air is supplied by the holes in the rear wall of the furnace, which creates an afterburning system. The system is responsible for the burning of the gases and the reduction of harmful substances emissions to the environment. It improves the efficiency of the fireplace, what have a direct influence on very low CO emission.

The device is equipped with a clean glass system - thanks to the so-called air curtain airflow is spread evenly, the glass is sweeped and soot settling is reduced to minimum.This allows you to maintain an effective and clean look of the glass for a long time.



Due to the construction of the insert and the triple combustion chamber ventilation system, the cartridge meets the Ecodesign requirements.

Technical data

General data
VersionFront facing
Rated output (kW)12
Heating power range (kW)6.0 - 15.5
Heating efficiency (%)81
Exhaust gas temperature (℃)240
Max length of logs (cm)50
Min inlet grids active field (cm2)≥700
Min outlet grids active field (cm2)≥900
Flue outlet diameter (mm)200
Self ClosureNo
MaterialsSteel, Cast iron
Door opening directionLeft
Energetic efficiency
Energy classA
Energy efficiency index (EEI)106
Moc cieplna do ogrzewania pomieszczeń (kW)12
CO emissions (at 13% O 2 ) ≤ given in %0.09
Dust emission (mg/Nm3)16
Certifications / Compliance
Meets requirementsEcodesign, BImSchV 2
Additional information
Design featuresAir intake - built in , Ashpan
Front typeCast iron front with ceramic glass
Type of fuelSeasoned deciduous wood (humidity ≤20%)
Physical parameters
Width (cm)65.2
Height (cm)83.3
Depth (cm)45.3

Customer reviews

This product has no reviews yet.
Have this product?
Rate Cast iron fireplace ZUZIA ECO 12 kW Ø 200 and help others to make a choice.

Store reviews

You're reviewing: Cast iron fireplace ZUZIA ECO 12 kW Ø 200


    Warranty and returns


    All products on are brand new, free from physical and legal defects and have been legally launched on the Polish market. The manufacturer gives a 5-year warranty on the proper functioning of the fireplace stove from the moment of its purchase. Fireplace grates and seals are covered by a guarantee for a period of 1 year from the time of purchasing the fireplace stove. The guarantee does not cover: heat resistant ceramics. The use of the fireplace stove, method of installation to the chimney, and operating conditions must be in accordance with the instruction manual.


    A Customer being a Consumer, who has concluded the Sales Contract may rescind thereof within a period of 14 days without giving any reasons. The time limits run for the rescission of the Sales Contract shall commence at the time of acquiring the Goods by the Customer or a third party of their choice, other, however, than a carrier. The representations may be submitted in a form whose template has been published by the Seller at the Online Shop Website.

    Recommended products

    Join our newsletter

    Join our newsletter and receive exclusive updates, attractive offers and valuable information directly to your inbox!

    Newsletter background image

    Shipping methods

    Payment methods

    Copyright © 2023 Wszelkie prawa zastrzeżone